How a Customized Feeding Solution Increased Plant Efficiency and Process Safety

Today's industrial processes are trending toward fully automated systems with as little human interaction as possible.

Completely self-contained processes are preferred because of the hazardous raw materials frequently used, such as Lithium or Barium based compounds in the chemical industry. If the components of the formulations do not change, there are already many good solutions available on the market, but if they do, standard solutions often do not offer enough flexibility.

One of Coperion K-Tron’s customers in the chemical industry also faced this problem. Johnson Matthey’s Clean Air Division has a manufacturing process involving several mixers at different stages of the process chain. Most raw materials can be fed into the mixer using conventional transport and metering solutions. However, there are ingredients which should be added into the mixers in small quantities flexibly, depending on each formulation.

Equipping all mixer lines with an additional feeder is simply not economically viable. That is why it was decided to develop a customized solution, so the Coperion K-Tron engineering team got to work designing a feeder which could be moved from mixer to mixer as required by the individual formulations. During development, several challenges emerged for which Coperion K-Tron’s specialists had to find a wide variety of solutions. The result was a mobile feeding station with various unique features.

Mobiler Dosierer von Coperion K-Tron
With its electrically operated platform adjustable in two axes, the mobile feeder can be positioned precisely over each mixer inlet.

Flexible Positioning and Dust-tight Docking

As the mixer inlets are not all at the same height, Coperion K-Tron designed a mobile feeding station on a moving platform that adjusts in two axes for maximum flexibility in reaching the inlets of the mixers. Various sensors and control algorithms were used to ensure that the platform does not collide with any other objects and that the feeder outlet can dock exactly above the mixer inlet.

The bulk materials to be fed into the mixer by the feeders are all very dusty and, in some cases, even dust-explosive. Since the docking points for filling the feeder as well as the discharge point are not ergonomically accessible for the operating personnel, a solution had to be found for a dust-tight, self-docking transition piece. For this purpose, a special drive was developed, which is also capable of handling the tolerances of the mixer positioning.

The weight of such a feeder exceeds the weight that one person can move alone. Therefore, an electric drive was essential to make the feeder mobile on the one hand and at the same time to lift the feeder to the right height. The image shows the loss-in-weight feeder mounted on a mobile lift in raised position. The platform on which the feeder is mounted can be extended significantly in the horizontal axis as well.

High Accuracy for Best Quality

Due to the tight tolerances of the chemical composition of the final product, the customer's formulations required high accuracy addition of the bulk solids. To achieve this, high-resolution (1:8,000,000 in 20 ms) Smart Force Transducer (SFT) digital load cells were used. With the KCM-III control unit, specially developed for high accuracy bulk feeding, the system can achieve feeding accuracies of +/- 0.25% (2 sigma), measured by taking 30 continuous measurements within 60 seconds.

Automatic Dispending of the Powder from Big Bags

The bulk material is delivered to the plant in so-called "big bags". Part of the process included the unloading of these big bags and the transport of the bulk material to the work area, where the mobile feeder is located. The solution for this task was a semi-automatic unloading station with chain crane, as well as a dust-free bag opening point. From the unloading station, the bulk material is pneumatically conveyed to the feeder. A pump is used to draw air out of the system, which creates a vacuum flow and sucks the bulk material into the specially equipped feeder hopper, similar to a vacuum cleaner.

Low Installation Height

The height restrictions of the processing area where the feeder is used limits the installation height of the system. A standard vacuum separator or cyclone with filter could not be placed above the feeder. Therefore, a receiver head was integrated directly in the feeder hopper and a filter receiver was placed in the return line. For refilling, the feeder returns to the docking station where it is connected to the vacuum lines. When refilling is started, the air stream with the bulk material is conveyed directly into the feeder hopper. Due to the diameter expansion in the hopper, the air velocity is throttled, and the bulk material settles while the air continues into the filter receiver, where any solid particles left in the air are filtered out. To ensure that no bulk material is lost, a rotary valve is installed under the filter receiver, which conveys the residual dust back into the conveying line.


The development of this creative solution, tailored specifically to the application, is a very good example of how to optimize a process and increase efficiency and quality in close cooperation with the customer. Coperion K-Tron provided Johnson Matthey with two of these mobile batch feeding stations and also designed additional custom mobile feeder solutions for other processes in their plant. “Coperion K-Tron did not just supply us with a piece of equipment,” says Ben Miller, Plant Manager, Johnson Matthey. “They provided us with a complete solution which significantly increased the efficiency of our process.”

Coperion K-Tron Aufbau für einen mobilen Dosierer
The mobile feeder can be moved from mixer to mixer as required, and then back to the base station for refilling.

Your Contact